How to setup WPA-PSK / WPA2-PSK for DIR-300
Please note use only hard-wired network connections, to do the setting.
** Disable firewall in your PC to avoid login problem**
Step 1 Connect Your PC (Laptop) to the Router (Port 1,2,3,4 either one of them) using Network cable.
Step 2 Launch your IE (Internet explorer) and key in 192.168.0.1 in the address column and press enter.
Step 3 Enter your Username: admin and no password (if it is default) click on OK
Step 4 You will see a D-Link configuration page, click on Setup > Wireless Setup > Manual Wireless Connection Setup.
Step 5 Click on the Security mode > choose Enable WPA / WPA2 wireless security.
Network Key : A Network key is the password that WPA-PSK / WPA2-PSK will use for authentication purposes. Both the wireless router and wireless card need to be configured with the same Network Key. Minimum characters is 8, maximum characters is 63.
Step 6 After Setting up your Network Key, click on Save Settings.
Step 7 Please wait for awhile while the router is saving the settings.
Step 8 You are done for the Router part of the WPA-PSK / WPA2-PSK (security key / network key ) setting.