Product Description
28-Port Layer 3 Stackable Gigabit PoE Switch
• 20 x 10/100/1000 Base-T PoE + 4 Combo 10/100/1000 Base-T/SFP PoE + 4 x 10 Gigabit SFP+ Slots
• Physical stack up to 12 units, 576 Gigabit ports, up to 40G Full-duplax Stacking bandwidth
• Flexible software options with Standard Image (SI) and Enhanced Image (EI) for Advance Features
• Support IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) with 370W Power Budget
• Support Virtual stack of up to 32 units using Single IP Management (SIM)
• Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
• Supports 802.1X user authentication via TACACS+ and RADIUS servers
• Support 802.1 ag Connectivity Fault Management (CFM) and 802.3 ah Ethernet OAM
• Offers extensive VLAN support including GVRP, 802.1Q VLAN to enhance security and performance
• Robust set of QoS/CoS solutions for critical network services (VoIP, ERP, Intranet, conferencing)
Mô tả
The DGS-3620 Series xStack L3 Managed Stackable Gigabit Switches deliver great performance, flexibility, security, multi-layer QoS, and accessibility, along with redundant power solutions for SMBs and enterprises. With high Gigabit port densities, Gigabit SFP and 10-Gigabit SFP+ support, and advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone and centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fiber to the Building (FTTB) networks that are extended to the subscribers’ sites.
Standard and Enhanced Images
The DGS-3620 Series is embedded with two different software images, the Standard Image (SI), and the Enhanced Image (EI). The Standard Image provides fundamental features for campuses and enterprises such as switching, routing, multicasting, advanced Quality of Service (QoS), and robust security features. The Enhanced Image supports OAM, BGP, IPv6 dynamic routing, and tunneling which are all suitable for the service provider network.
Unparalleled Flexibility
Easily deployed and simple to manage, the DGS-3620 Series can be stacked with any switch that supports D-Link’s Single IP Management to form a multi-level network structured with backbone and centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, and uses optional 10-Gigabit uplinks to move intrastack traffic at 20 Gbps full duplex speeds. The stack can also eliminate single point of failures, cable distance barriers, limitations of physical stacking, and the need for stack cabling.
Redundant Ring Stacking
Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use a maximum of four 10-Gigabit SFP ports to create a physical stack4 . 12 units or 576 Gigabit ports can be configured for a stack using direct attach cables providing high bandwidth on the already cost-efficient DGS-3620 Series.
Security, Performance & Availability
The DGS-3620 Series provides a complete set of security features including L2/L3/L4 multi-layer Access Control Lists and 802.1X user authentication via TACACS+ and RADIUS servers. D-Link ZoneDefense technology is built-in, allowing businesses to integrate the switch stack with D-Link NetDefend firewalls to implement a complete and proactive security infrastructure. The DGS-3620 Series offers extensive VLAN support including GVRP and 802.1Q VLAN to enhance security and performance. A robust set of L2/L3/ L4 QoS/CoS solutions help ensure that critical network services such as VoIP, ERP, Intranet, and video conferencing are served with proper priority. The DGS-3620 Series provides D-Link’s Safeguard Engine to increase the switch’s reliability, serviceability, and availability to prevent malicious flooding traffic caused by worms or virus infections. Bandwidth Control can be flexibly set for each port using pre-defined thresholds to assure a committed level of service for end users. For advanced applications, flow-based bandwidth control allows easy fine-tuning of service types based on specific IP addresses or protocols.
IPv6 Technology
The DGS-3620 Series also features comprehensive IPv6 support, including IPv6 Tunnel, ICMPv6, DHCPv6, RIPng, OSPFv3, IPv4/IPv6 dual stack and more. With 10-Gigabit connectivity and IPv6 support, the DGS-3620 Series enables you to future-proof your network for cost efficiency and longevity while meeting the requirements that future IPv6-capable network devices require.
D-Link Green Technology
D-Link is striving to take the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-3620 Series implements D-Link Green technology, which includes a power-saving mode, smart fan feature, reduced heat dissipation, and cable length detection. The power-saving feature automatically powers down ports that have no link or link partner, and ensures that LEDs are shut off when not needed. The Smart Fan feature allows for the built-in fans to automatically turn on only at a certain temperature, providing continuous, reliable, and ecofriendly operation of the switch.
Returns and Exchanges
There are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to Us
Firstly Print and return this Returns Form to:
30 South Park Avenue, San Francisco, CA 94108, USA
Please remember to ensure that the item you are returning is repackaged with all elements.
For more information, view our full Returns and Exchanges information.
Related Products
• 44 x 10/100/1000 Base-T Ports + 4 Combo 10/100/1000 Base-T/SFP Port + 4 10G SFP+ Slots • Physical stack up to 9 units, 432 Gigabit ports, up to 80 Gbps per device physical stacking bandwidth • Support Virtual stack of up to 32 units using Single IP Management (SIM) • Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) • Flexible software options with Standard Image (SI) and Enhanced Image (EI) for Advance Features • Supports 802.1X user authentication via TACACS+ and RADIUS servers • Offers extensive VLAN support including GVRP, 802.1Q VLAN to enhance security and performance • Robust set of QoS/CoS solutions for critical network services (VoIP, ERP, Intranet, conferencing) • Support 802.1 ag Connectivity Fault Management (CFM) and 802.3 ah Ethernet OAM • Support Data Center Bridging Standard - IEEE 802.1Qbb, Priority-based Flow Control (PFC) for 10G Ports
• 20 Ports 10 Gigabit SFP+ Slots and 4-port 10GBASE-T/SFP+ Combo Port • Supports Lossless Ethernet Feature via Data Center Bridging (DCB) • Support IEEE 802.1Qbb (PFC) , IEEE 802.1Qaz (ETS), IEEE 802.1Qau (CN) • Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM) • Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) • Switch Resource Management (SRM) for flexible management of system resources • Physical Stacking via four 10G ports, can stack up to 4 devices • Virtual Stacking/Clustering of up to 32 units via D-Link Single IP Management
• 20 Ports Gigabit SFP Slots + 4 Combo 10/100/1000 Base-T/SFP Port + 4 10G SFP+ Slots • Physical stack up to 9 units, 432 Gigabit ports, up to 80 Gbps per device physical stacking bandwidth • Support Virtual stack of up to 32 units using Single IP Management (SIM) • Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) • Flexible software options with Standard Image (SI) and Enhanced Image (EI) for Advance Features • Supports 802.1X user authentication via TACACS+ and RADIUS servers • Offers extensive VLAN support including GVRP, 802.1Q VLAN to enhance security and performance • Robust set of QoS/CoS solutions for critical network services (VoIP, ERP, Intranet, conferencing) • Support 802.1 ag Connectivity Fault Management (CFM) and 802.3 ah Ethernet OAM • Support Data Center Bridging Standard - IEEE 802.1Qbb, Priority-based Flow Control (PFC) for 10G Ports
• 20 x 10/100/1000 Base-T Ports + 4 Combo 10/100/1000 Base-T/SFP Port + 4 10G SFP+ Slots • Physical stack up to 9 units, 432 Gigabit ports, up to 80 Gbps per device physical stacking bandwidth • Support Virtual stack of up to 32 units using Single IP Management (SIM) • Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) • Flexible software options with Standard Image (SI) and Enhanced Image (EI) for Advance Features • Supports 802.1X user authentication via TACACS+ and RADIUS servers • Offers extensive VLAN support including GVRP, 802.1Q VLAN to enhance security and performance • Robust set of QoS/CoS solutions for critical network services (VoIP, ERP, Intranet, conferencing) • Support 802.1 ag Connectivity Fault Management (CFM) and 802.3 ah Ethernet OAM • Support Data Center Bridging Standard - IEEE 802.1Qbb, Priority-based Flow Control (PFC) for 10G Ports
• 20-port 10GBASE-T and 4-port 10GBASE-T/SFP+ Combo Port • Supports Lossless Ethernet Feature via Data Center Bridging (DCB) Support IEEE 802.1Qbb (PFC) , IEEE 802.1Qaz (ETS), IEEE 802.1Qau (CN) • Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM) • Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) • Switch Resource Management (SRM) for flexible management of system resources • Physical Stacking via four 10G ports, can stack up to 4 devices Virtual Stacking/Clustering of up to 32 units via D-Link Single IP Management
28-Port Layer 3 Stackable Gigabit PoE Switch
28-Port Layer 3 Stackable Gigabit PoE Switch
• 20 x 10/100/1000 Base-T PoE + 4 Combo 10/100/1000 Base-T/SFP PoE + 4 x 10 Gigabit SFP+ Slots
• Physical stack up to 12 units, 576 Gigabit ports, up to 40G Full-duplax Stacking bandwidth
• Flexible software options with Standard Image (SI) and Enhanced Image (EI) for Advance Features
• Support IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) with 370W Power Budget
• Support Virtual stack of up to 32 units using Single IP Management (SIM)
• Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
• Supports 802.1X user authentication via TACACS+ and RADIUS servers
• Support 802.1 ag Connectivity Fault Management (CFM) and 802.3 ah Ethernet OAM
• Offers extensive VLAN support including GVRP, 802.1Q VLAN to enhance security and performance
• Robust set of QoS/CoS solutions for critical network services (VoIP, ERP, Intranet, conferencing)
The DGS-3620 Series xStack L3 Managed Stackable Gigabit Switches deliver great performance, flexibility, security, multi-layer QoS, and accessibility, along with redundant power solutions for SMBs and enterprises. With high Gigabit port densities, Gigabit SFP and 10-Gigabit SFP+ support, and advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone and centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fiber to the Building (FTTB) networks that are extended to the subscribers’ sites.
Standard and Enhanced Images
The DGS-3620 Series is embedded with two different software images, the Standard Image (SI), and the Enhanced Image (EI). The Standard Image provides fundamental features for campuses and enterprises such as switching, routing, multicasting, advanced Quality of Service (QoS), and robust security features. The Enhanced Image supports OAM, BGP, IPv6 dynamic routing, and tunneling which are all suitable for the service provider network.
Unparalleled Flexibility
Easily deployed and simple to manage, the DGS-3620 Series can be stacked with any switch that supports D-Link’s Single IP Management to form a multi-level network structured with backbone and centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, and uses optional 10-Gigabit uplinks to move intrastack traffic at 20 Gbps full duplex speeds. The stack can also eliminate single point of failures, cable distance barriers, limitations of physical stacking, and the need for stack cabling.
Redundant Ring Stacking
Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use a maximum of four 10-Gigabit SFP ports to create a physical stack4 . 12 units or 576 Gigabit ports can be configured for a stack using direct attach cables providing high bandwidth on the already cost-efficient DGS-3620 Series.
Security, Performance & Availability
The DGS-3620 Series provides a complete set of security features including L2/L3/L4 multi-layer Access Control Lists and 802.1X user authentication via TACACS+ and RADIUS servers. D-Link ZoneDefense technology is built-in, allowing businesses to integrate the switch stack with D-Link NetDefend firewalls to implement a complete and proactive security infrastructure. The DGS-3620 Series offers extensive VLAN support including GVRP and 802.1Q VLAN to enhance security and performance. A robust set of L2/L3/ L4 QoS/CoS solutions help ensure that critical network services such as VoIP, ERP, Intranet, and video conferencing are served with proper priority. The DGS-3620 Series provides D-Link’s Safeguard Engine to increase the switch’s reliability, serviceability, and availability to prevent malicious flooding traffic caused by worms or virus infections. Bandwidth Control can be flexibly set for each port using pre-defined thresholds to assure a committed level of service for end users. For advanced applications, flow-based bandwidth control allows easy fine-tuning of service types based on specific IP addresses or protocols.
IPv6 Technology
The DGS-3620 Series also features comprehensive IPv6 support, including IPv6 Tunnel, ICMPv6, DHCPv6, RIPng, OSPFv3, IPv4/IPv6 dual stack and more. With 10-Gigabit connectivity and IPv6 support, the DGS-3620 Series enables you to future-proof your network for cost efficiency and longevity while meeting the requirements that future IPv6-capable network devices require.
D-Link Green Technology
D-Link is striving to take the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-3620 Series implements D-Link Green technology, which includes a power-saving mode, smart fan feature, reduced heat dissipation, and cable length detection. The power-saving feature automatically powers down ports that have no link or link partner, and ensures that LEDs are shut off when not needed. The Smart Fan feature allows for the built-in fans to automatically turn on only at a certain temperature, providing continuous, reliable, and ecofriendly operation of the switch.
Specifications
Features | ||
Flexibility | 20/48 10/100/1000BASE-T ports or 20 SFP slots 4 Comb 10/100/1000BASE-T/SFP ports 4 10-Gigabit SFP+ uplink ports 802.3af and 802.3at PoE support |
|
Security | L2/L3/L4 multi-layer Access Control External RADIUS/TACACS+ authentication SSH/SSL support 802.1X guest VLAN D-Link Safeguard Engine Unicast Reverse Path Forwarding (uRPF)3 |
|
Reliability | Redundant Power Supply (RPS) support 802.1D/802.1w/802.1s Spanning Tree Loopback Detection (LBD) Ethernet Ring Protection Switching (ERPS) |
|
High Bandwidth | Physical/Virtual Stacking Physical stack of up t 12 units, 576 Gigabit ports Virtual stack of up t 32 units using single IP management |
|
OAM | 802.3ah Ethernet link OAM 802.1ag, ITU-T Y.1731 service OAM |
|
Interface | ||
Number of 10/100/1000BASE-TX ports | DGS-3620-28TC - 20 ports DGS-3620-28PC - 20 ports DGS-3620-52T - 48 ports~DGS-3620-52P - 48 ports |
|
Number of SFP ports | DGS-3620-28SC - 20 ports | |
Number of Comb 1000Base-T/SFP ports | DGS-3620-28TC - 4 ports DGS-3620-28PC - 4 ports DGS-3620-28SC - 4 ports |
|
Number of SFP+ ports | DGS-3620-28TC - 4 ports DGS-3620-28PC - 4 ports DGS-3620-28SC - 4 ports DGS-3620-52T - 4 ports DGS-3620-52P - 4 ports |
|
Optional redundant power supply | DGS-3620-28TC - DPS-500 DGS-3620-28PC - DPS-700 DGS-3620-28SC - DPS-500 DGS-3620-52T - DPS-500 DGS-3620-52P - DPS-700 |
|
RS-232 console port | Yes | |
Management port | 10/100BASE-TX | |
Alarm port | Yes | |
SD card slot | Yes | |
PoE Supported Models (Standard(s)/Number of Ports/Maximum Power Budget) | DGS-3620-28PC - 802.3af/at/24 ports/370W (760W with DPS-700 RPS) DGS-3620-52P - 802.3af/at/48 ports/370W (760W with DPS-700 RPS) |
|
Performance | ||
Switch Capacity | DGS-3620-28TC - 128 Gbps DGS-3620-28PC - 128 Gbps DGS-3620-28SC - 128 Gbps DGS-3620-52T - 176 Gbps DGS-3620-52P - 176 Gbps |
|
64-Byte Packet Forwarding Rate | DGS-3620-28TC - 95.24 Mpps DGS-3620-28PC - 95.24 Mpps DGS-3620-28SC - 95.24 Mpps DGS-3620-52T - 130.95 Mpps DGS-3620-52P - 130.95 Mpps |
|
Packet Buffer | 2 MB | |
MAC address table | 32K entries | |
IPv4 routing table | 12K entries | |
IPv6 routing table | 6K entries | |
IPv4 forwarding table | 8K entries | |
IPv6 forwarding table | 4K entries | |
Jumbo frame size | 130000 bytes | |
Physical & Environmental | ||
MTBF | DGS-3620-28TC - 292976 hours DGS-3620-28PC - 236811 hours DGS-3620-28SC - 298263 hours DGS-3620-52T - 247929 hours DGS-3620-52P - 225645 hours |
|
Acoustics (max) | DGS-3620-28TC - 48.5 dB DGS-3620-28PC - 52.1 dB DGS-3620-28SC - 49.9 dB DGS-3620-52T - 54.2 dB DGS-3620-52P - 56.2 dB |
|
Heat Dissipation (max) | DGS-3620-28TC - 155.8 BTU/hr DGS-3620-28PC - 1712.5 BTU/hr DGS-3620-28SC - 144.2 BTU/hr DGS-3620-52T - 259.1 BTU/hr DGS-3620-52P - 1763.3 BTU/hr |
|
Power Input | 100 t 240 VAC, 50 t 60Hz Internal Universal Power Supply |
|
Power Consumption (max) | DGS-3620-28TC - 45.1 W DGS-3620-28PC - 502.2 W DGS-3620-28SC - 43.4 W DGS-3620-52T - 76.0 W DGS-3620-52P - 517.1 W |
|
Dimensions (W x D x H) | DGS-3620-28TC - 441 x 310 x 44 mm (17.36 x 12.20 x 1.73 inches) DGS-3620-28PC - 441 x 310 x 44 mm (17.36 x 12.20 x 1.73 inches) DGS-3620-28SC - 441 x 310 x 44 mm (17.36 x 12.20 x 1.73 inches) DGS-3620-52T - 441 x 310 x 44 mm (17.36 x 12.20 x 1.73 inches) DGS-3620-52P - 441 x 310 x 44 mm (17.36 x 12.20 x 1.73 inches) |
|
Weight | DGS-3620-28TC - 4.15 kg(9.15 lbs) DGS-3620-28PC - 5.76 kg (12.70 lbs) DGS-3620-28SC - 4.10 kg (9.04 lbs) DGS-3620-52T - 5.13 kg (11.31 lbs) DGS-3620-52P - 6.30 kg (13.89 lbs) |
|
Ventilation | Smart fan | |
Temperature | Operating: 0° t 50°C Storage: -40° t 70°C |
|
Operating Humidity | Operating: 10% ~ 90% Non-condensing Storage: 5% ~ 90% Non-condensing |
|
EMI/EMC | FCC Class A, CE Class A, VCCI Class A, IC, C-Tick | |
Safety | CB, cUL, LVD | |
Certification | IPv6 Ready Log Phase 2 |
|
Software Feature | ||
Stackability | Virtual stacking support D-Link Single IP Management Up t 32 devices per virtual stack Up t 20G stacking bandwidth Physical stacking Supports duplex chain/ring topology Up t 40G stacking bandwidth Up t 12 units per stack |
|
L2 Features | MAC address table: 32K Flow control 802.3x Flow control HOL blocking prevention Jumb frames up t 13000 bytes IGMP snooping IGMP v1/v2/v3 snooping Supports 1K groups Port/host-based IGMP snooping fast leave MLD snooping MLD v1 snooping Supports 1K groups Host-based MLD snooping fast leave~Spanning tree 802.1D-2004 STP 802.1w RSTP 802.1Q-2005 MSTP BPDU filtering Root restriction Loopback detection 802.3ad link aggregation Max. 32 groups per device 8 Gigabit ports or 2 10-Gigabit ports per group Port mirroring Supports 4 mirroring groups Supports one-to-one, many-to-one, flow-based, and RSPAN mirroring L2 protocol tunneling ERPS (Ethernet Ring Protection Switching) |
|
VLAN | VLAN group Max. 4K static VLAN groups Max. 255 dynamic VLAN groups 802.1Q tagged VLAN 802.1v protocol VLAN GVRP Double VLAN (Q-in-Q) Port-based Q-in-Q Selective Q-in-Q MAC-based VLAN VLAN trunking Super VLAN |
|
L3 Features | 256 IP interfaces Loopback interface UDP helper5 VRRP Proxy ARP Gratuitous ARP |
|
L3 Routing | 12K routing entries shared by IPv4/v6 Max. 12K IPv4 routes Max. 6K IPv6 routes 8K L3 forwarding entries shared by IPv4/v6 Max. 8K IPv4 entries Max. 4K IPv6 entries 256 static routing entries for IPv4, 128 entries for IPv6 Supports ECMP/WCMP Policy-based routing RIP v1/v2 OSPF OSPF v2 OSPF passive interface Stub/NSSA area OSPF equal cost route |
|
Multicasting | 2K multicast groups PIM-DM PIM-SM PIM sparse-dense mode IGMP v1/v2/v3 |
|
QoS (Quality of Service) | 802.1p Class of Service (CoS) 8 queues per port Queue handling Strict Weighted Round Robin (WRR) Strict + WRR WRED4 CoS based on Switch port VLAN ID 802.1p priority queues MAC address IPv4/v6 address DSCP Protocol type IPv6 traffic class IPv6 flow label TCP/UDP port User-defined packet content Supports following actions for flows: Remark 802.1p priority tag Remark TOS/DSCP tag Bandwidth control Flow statistics Committed Information Rate (CIR), min. granularity 1 Kbps. |
|
Bandwidth control | Port-based (ingress/egress, min. granularity 8 Kbps)3 Flow-based (ingress, min. granularity 8 Kbps)3 Time-based QoS |
|
ACL (Access Control List) | Ingress ACL: support up t 6 profiles and 256 rules per profile Egress ACL: support up t 4 profiles and 128 rules per profile |
|
ACL based on 802.1p priority VLAN ID MAC address Ether type~IPv4/v6 address DSCP Protocol type~TCP/UDP port number IPv6 traffic class IPv6 flow label User-defined packet content ACL statistics Time-based ACL |
||
Green | Power saving by link status Power saving by cable length Power saving by LED shut-off Power saving by port shut-off Power saving by system hibernation 802.3az Energy-Efficient Ethernet6 |
|
Security | SSH v2 SSL v1/v2/v3 Port security for up t 3328 MAC addresses for port/system/VLAN Broadcast/multicast/unicast storm control Traffic segmentation IP-MAC-port binding ARP packet inspection IP packet inspection DHCP snooping DHCPv6 and NDP snooping Supports up t 500 address binding entries per device D-Link safeguard engine DHCP server screening CPU interface filtering ARP spoofing prevention BPDU attack protection Unicast reverse path forwarding DoS attack prevention5 |
|
AAA | 802.1X Port-based access control Host-based access control Dynamic VLAN assignment Web-based Access Control (WAC) Port-based access control Host-based access control Dynamic VLAN assignment MAC-based Access Control(MAC) Port-based access control Host-based access control Dynamic VLAN assignment Japan Web-based Access Control (JWAC) Host-based access control Microsoft® NAP~Supports 802.1X NAP Supports DHCP NAP Guest VLAN RADIUS and TACACS+ authentication for switch access 4-Level user account |
|
Management | Web-based GUI Command Line Interface (CLI) Telnet server Telnet client TFTP client ZModem SNMP v1/v2c/v3 SNMP trap System log RMON v1 Supports 1,2,3,9 groups RMON v2 Supports ProbeConfig group sFlow LLDP/LLDP-MED BootP/DHCP client DHCP auto-configuration DHCP relay DHCP relay option 60; 61 DHCP relay option 82 DHCP server Flash file system Multiple images Multiple configurations CPU monitoring IPv4/IPv6 DNS client Debug command SNTP ICMPv6 DHCPv6 client DHCPv6 relay DHCPv6 server DHCPv6 PD4 Trusted host MTU setting Microsoft® NLB support Secure FTP5 DHCPv6 PD5 |
|
OAM | 802.3ah Ethernet link OAM Cable diagnostics 802.3ah D-Link extension: D-Link Unidirectional Link Detection (DULD) IEEE1588 Precision Time Protocol (PTP) |
|
MIB/IETF Standards | RFC1213 MIB-II RFC1493, 4188 bridge MIB RFC1907 SNMPv2 MIB RFC2571~2576 SNMP MIB RFC1271, 2819 RMON MIB RFC2021 RMON v2 MIB RFC1398, 1643, 1650, 2358, 2665 Ether-like MIB RFC2668 MAU MIB RFC2674, 4363 802.1p MIB RFC2233, 2863 IF MIB RFC2618 RADIUS authentication client MIB RFC1724 RIP v2 MIB RFC1850 OSPF v2 MIB RFC2096, 4292 IP forwarding table MIB (CIDR) RFC2787 VRRP MIB RFC2932 IPv4 multicast routing MIB RFC2934 PIM MIB for IPv4 RFC2620 RADIUS accounting client MIB RFC2933 IGMP MIB RFC2925 ping MIB RFC2925 traceroute MIB D-Link private MIB RFC768 UDP RFC783 TFTP RFC 791 IP RFC 792 ICMP RFC 793 TCP RFC 826 ARP RFC854 Telnet RFC951, 1542, 2131 BootP RFC2068, 2618 HTTP RFC2338 VRRP RFC2529, 3053, 3056 IPv6 Tunnel RFC2138 RADIUS RFC2139 RADIUS Accounting RFC1492 TACACS RFC3176 sFlow RFC2598 DiffServ Expedited Forwarding (EF) RFC2460 IPv6 RFC2461, 4861 IPv6 Neighbor Discovery (ND) RFC2462, 4862 IPv6 stateless address autoconfiguration RFC1981 IPv6 path MTU discovery RFC4213 IPv4/IPv6 dual stack |
|
Enhanced Image (EI) Features | ||
L3 Features | IPv6 tunneling Static ISATAP GRE 6to4 |
|
L3 Routing | RIPng (IPv6) OSPF OSPF v3 (IPv6) BGP v4 |
|
Multicasting | PIM-SM v6 DVMRP v3 |
|
OAM | 802.1ag Connectivity Fault Management (CFM) ITU-T Y.1731 |