Product Description
N600 Unified Dual-Band Wireless Access Point
• Up to 300 Mbps Wireless Speed Performance in either the 2.4 GHz or 5 GHz Band
• 2×2 MIMO embedded antenna with 4 external antenna connectors
• Support self-configuring cluster to enable effortless provisioning
• Up to 32 virtual access points (VAP) may be created from a single access point
• Wi-Fi Multimedia™ Quality of Service makes an ideal AP for audio, video, and voice application.
• Up to 16 SSIDs per frequency band and 32 SSIDs per AP
• 802.3af Power Over Ethernet enables installation at hard to reach locations
• Support Dynamic Auto-Channel Selection in Standalone Mode
• Support Load balancing to optimise high network traffic volume and redundancy
• Automatic RF Adjustment and management in densely AP deployment
Mô tả
Features
Ideal for Business
• Blazing wireless performance of up to 300 Mbps1 network throughput
• Self-configuring cluster enables effortless provisioning
• Up to 32 virtual access points may be created from a single device
• Automatic load-balancing among neighboring access points
• Flexible QoS with WMM
Trusted Security
• WPA/WPA2 Personal
• WPA/WPA2 Enterprise
• WEP Encryption
• 802.1X User authentication
• MAC address filtering
• Rogue AP detection
Convenient Installation
• Can be easily mounted on a wall or ceiling
• 802.3af Power Over Ethernet enables installation in hard-to-reach locations
• Zero configuration installation
The DWL-6600AP/(PC) Unified N Dual-band PoE Access Point is a best-in-class indoor access point designed specifically for business-class environments. With high data transmission speeds and access point load balancing, the DWL-6600AP/(PC) offers high-quality and reliable wireless service. Versatile and powerful, the DWL-6600AP/(PC) can be flexibly deployed as a standalone wireless access point or as a managed access point controlled by a D-Link Unified Wireless Switch or Wireless Controller. Businesses can start with standalone mode deployment, then migrate to a centrally managed system anytime later.
Enhanced Performance
The DWL-6600AP delivers reliable wireless performance with maximum wireless signal rates of up to 300 Mbps in either the 2.4 GHz or 5 GHz mode. Support for Wi-Fi Multimedia™ (WMM) Quality of Service features makes the DWL-6600AP an ideal access point for audio, video, and voice application. In addition, the load balancing feature ensures maximum performance and best service quality in the wireless environment.
Self-Configuring Cluster
For small businesses that need to deploy multiple access points (APs) but lack the resources to tackle the complicated task of network management, the DWL-6600AP’s self-configuring cluster feature offers the ideal solution. When a small number of DWL-6600APs is deployed on the network, they may be configured to form a self-configuring cluster. Once the administrator is through with configuring one access point, the same configuration can then be applied to all remaining APs. Up to 16 APs may be used to form a cluster.
Unified Management
Alternatively, the DWL-6600AP can operate in conjunction with a D-Link Wireless Switch and Wireless Controller. In this mode, multiple DWL-6600APs can connect directly or indirectly to one of these switches/ controllers to provide unparalleled security and wireless mobility for wireless clients. Each DWL-6600AP will be continually tuned by these switches to provide the optimal RF channels and transmission power for all mobile clients, giving them the best wireless signals in both 2.4GHz and 5.0GHz bands and uninterrupted wireless connectivity.
Security
The DWL-6600AP supports the latest standards in Wi-Fi security, including WEP, WPA, WPA2, and 802.1X. In addition, the DWL-6600AP supports up to 16 virtual access points (VAP) per radio, for a total of 32 VAPs, which allows the administrator to assign different access privileges to different groups of users. When Station Isolation is enabled, the AP blocks communication between wireless clients on the same radio and VAP. Rogue APs in the network may be easily detected, and the administrator will be immediately notified of any security threat. When used together with D-Link’s line of Unified Wireless Switches and Wireless Controllers, the security can be raised to a new level.
Convenient Installation
With an embedded antenna and simple styled exterior, the DWL-6600AP can be installed on a wall or ceiling and blends in with most interior decorations in an office. Enclosed in a plenum-rated chassis2 , the DWL-6600AP adheres to strict fire codes for placement in air passageways. For easy installation, the DWL-6600AP has integrated 802.3af Power over Ethernet (PoE) support, allowing installation of this device in areas where power outlets are not readily available.
Returns and Exchanges
There are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to Us
Firstly Print and return this Returns Form to:
30 South Park Avenue, San Francisco, CA 94108, USA
Please remember to ensure that the item you are returning is repackaged with all elements.
For more information, view our full Returns and Exchanges information.
Related Products
• 20-port 10GBASE-T and 4-port 10GBASE-T/SFP+ Combo Port • Supports Lossless Ethernet Feature via Data Center Bridging (DCB) Support IEEE 802.1Qbb (PFC) , IEEE 802.1Qaz (ETS), IEEE 802.1Qau (CN) • Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM) • Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) • Switch Resource Management (SRM) for flexible management of system resources • Physical Stacking via four 10G ports, can stack up to 4 devices Virtual Stacking/Clustering of up to 32 units via D-Link Single IP Management
• 20 Ports Gigabit SFP Slots + 4 Combo 10/100/1000 Base-T/SFP Port + 4 10G SFP+ Slots • Physical stack up to 9 units, 432 Gigabit ports, up to 80 Gbps per device physical stacking bandwidth • Support Virtual stack of up to 32 units using Single IP Management (SIM) • Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) • Flexible software options with Standard Image (SI) and Enhanced Image (EI) for Advance Features • Supports 802.1X user authentication via TACACS+ and RADIUS servers • Offers extensive VLAN support including GVRP, 802.1Q VLAN to enhance security and performance • Robust set of QoS/CoS solutions for critical network services (VoIP, ERP, Intranet, conferencing) • Support 802.1 ag Connectivity Fault Management (CFM) and 802.3 ah Ethernet OAM • Support Data Center Bridging Standard - IEEE 802.1Qbb, Priority-based Flow Control (PFC) for 10G Ports
• 20 Ports 10 Gigabit SFP+ Slots and 4-port 10GBASE-T/SFP+ Combo Port • Supports Lossless Ethernet Feature via Data Center Bridging (DCB) • Support IEEE 802.1Qbb (PFC) , IEEE 802.1Qaz (ETS), IEEE 802.1Qau (CN) • Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM) • Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) • Switch Resource Management (SRM) for flexible management of system resources • Physical Stacking via four 10G ports, can stack up to 4 devices • Virtual Stacking/Clustering of up to 32 units via D-Link Single IP Management
• 44 x 10/100/1000 Base-T Ports + 4 Combo 10/100/1000 Base-T/SFP Port + 4 10G SFP+ Slots • Physical stack up to 9 units, 432 Gigabit ports, up to 80 Gbps per device physical stacking bandwidth • Support Virtual stack of up to 32 units using Single IP Management (SIM) • Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) • Flexible software options with Standard Image (SI) and Enhanced Image (EI) for Advance Features • Supports 802.1X user authentication via TACACS+ and RADIUS servers • Offers extensive VLAN support including GVRP, 802.1Q VLAN to enhance security and performance • Robust set of QoS/CoS solutions for critical network services (VoIP, ERP, Intranet, conferencing) • Support 802.1 ag Connectivity Fault Management (CFM) and 802.3 ah Ethernet OAM • Support Data Center Bridging Standard - IEEE 802.1Qbb, Priority-based Flow Control (PFC) for 10G Ports
• 20 x 10/100/1000 Base-T Ports + 4 Combo 10/100/1000 Base-T/SFP Port + 4 10G SFP+ Slots • Physical stack up to 9 units, 432 Gigabit ports, up to 80 Gbps per device physical stacking bandwidth • Support Virtual stack of up to 32 units using Single IP Management (SIM) • Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) • Flexible software options with Standard Image (SI) and Enhanced Image (EI) for Advance Features • Supports 802.1X user authentication via TACACS+ and RADIUS servers • Offers extensive VLAN support including GVRP, 802.1Q VLAN to enhance security and performance • Robust set of QoS/CoS solutions for critical network services (VoIP, ERP, Intranet, conferencing) • Support 802.1 ag Connectivity Fault Management (CFM) and 802.3 ah Ethernet OAM • Support Data Center Bridging Standard - IEEE 802.1Qbb, Priority-based Flow Control (PFC) for 10G Ports
N600 Unified Dual-Band Wireless Access Point
N600 Unified Dual-Band Wireless Access Point
• Up to 300 Mbps Wireless Speed Performance in either the 2.4 GHz or 5 GHz Band
• 2×2 MIMO embedded antenna with 4 external antenna connectors
• Support self-configuring cluster to enable effortless provisioning
• Up to 32 virtual access points (VAP) may be created from a single access point
• Wi-Fi Multimedia™ Quality of Service makes an ideal AP for audio, video, and voice application.
• Up to 16 SSIDs per frequency band and 32 SSIDs per AP
• 802.3af Power Over Ethernet enables installation at hard to reach locations
• Support Dynamic Auto-Channel Selection in Standalone Mode
• Support Load balancing to optimise high network traffic volume and redundancy
• Automatic RF Adjustment and management in densely AP deployment
Features
Ideal for Business
• Blazing wireless performance of up to 300 Mbps1 network throughput
• Self-configuring cluster enables effortless provisioning
• Up to 32 virtual access points may be created from a single device
• Automatic load-balancing among neighboring access points
• Flexible QoS with WMM
Trusted Security
• WPA/WPA2 Personal
• WPA/WPA2 Enterprise
• WEP Encryption
• 802.1X User authentication
• MAC address filtering
• Rogue AP detection
Convenient Installation
• Can be easily mounted on a wall or ceiling
• 802.3af Power Over Ethernet enables installation in hard-to-reach locations
• Zero configuration installation
The DWL-6600AP/(PC) Unified N Dual-band PoE Access Point is a best-in-class indoor access point designed specifically for business-class environments. With high data transmission speeds and access point load balancing, the DWL-6600AP/(PC) offers high-quality and reliable wireless service. Versatile and powerful, the DWL-6600AP/(PC) can be flexibly deployed as a standalone wireless access point or as a managed access point controlled by a D-Link Unified Wireless Switch or Wireless Controller. Businesses can start with standalone mode deployment, then migrate to a centrally managed system anytime later.
Enhanced Performance
The DWL-6600AP delivers reliable wireless performance with maximum wireless signal rates of up to 300 Mbps in either the 2.4 GHz or 5 GHz mode. Support for Wi-Fi Multimedia™ (WMM) Quality of Service features makes the DWL-6600AP an ideal access point for audio, video, and voice application. In addition, the load balancing feature ensures maximum performance and best service quality in the wireless environment.
Self-Configuring Cluster
For small businesses that need to deploy multiple access points (APs) but lack the resources to tackle the complicated task of network management, the DWL-6600AP’s self-configuring cluster feature offers the ideal solution. When a small number of DWL-6600APs is deployed on the network, they may be configured to form a self-configuring cluster. Once the administrator is through with configuring one access point, the same configuration can then be applied to all remaining APs. Up to 16 APs may be used to form a cluster.
Unified Management
Alternatively, the DWL-6600AP can operate in conjunction with a D-Link Wireless Switch and Wireless Controller. In this mode, multiple DWL-6600APs can connect directly or indirectly to one of these switches/ controllers to provide unparalleled security and wireless mobility for wireless clients. Each DWL-6600AP will be continually tuned by these switches to provide the optimal RF channels and transmission power for all mobile clients, giving them the best wireless signals in both 2.4GHz and 5.0GHz bands and uninterrupted wireless connectivity.
Security
The DWL-6600AP supports the latest standards in Wi-Fi security, including WEP, WPA, WPA2, and 802.1X. In addition, the DWL-6600AP supports up to 16 virtual access points (VAP) per radio, for a total of 32 VAPs, which allows the administrator to assign different access privileges to different groups of users. When Station Isolation is enabled, the AP blocks communication between wireless clients on the same radio and VAP. Rogue APs in the network may be easily detected, and the administrator will be immediately notified of any security threat. When used together with D-Link’s line of Unified Wireless Switches and Wireless Controllers, the security can be raised to a new level.
Convenient Installation
With an embedded antenna and simple styled exterior, the DWL-6600AP can be installed on a wall or ceiling and blends in with most interior decorations in an office. Enclosed in a plenum-rated chassis2 , the DWL-6600AP adheres to strict fire codes for placement in air passageways. For easy installation, the DWL-6600AP has integrated 802.3af Power over Ethernet (PoE) support, allowing installation of this device in areas where power outlets are not readily available.
Specifications
Wi-Fi Interface | 802.11a/b/g/n 2.4/5.0 GHz | |
LAN Interface | 10/10/100 Gigabit Ethernet | |
Console | RJ-45 | |
Antenna | 2x2 MIMO embedded antenna with 4 external antenna connectors | |
Power Method | IEEE 802.3af Power Over Ethernet or external power adapter | |
Audio Support | G.726 G.711 |
|
802.11n | 2.4 to 2.497 GHz and 4.9 to 5.85 GHz | |
802.11b/g | 2.4 to 2.4835 GHz | |
802.11a | 5.15 to 5.35 GHz and 5.725 to 5.825 GHz |